Hyundai H-LCD1502 - Manual (Page 6)

6
Installation
Antenna connection
1. Connect the plug of the antenna cable or CATV cable to the cable (not provided with this unit),
then connect to the antenna input of this unit for best reception.
2. If the antenna cable in your home is other than the above two, or you have problems in
installing the antenna, please contact your dealer.
Notes:
1. Current outdoor antenna or cable TV usually use 75 Ohm coaxial antenna cable. For better
reception suggest using this kind of antenna cable.
2. Flat cable or indoor antenna are old designed, the reception may not be good enough.
Battery installation and replacement for remote control unit.
The remote control uses two 1.5VAAA batteries.
Battery installation and replacement procedure is as follows:
1. Turn the remote control unit upside down. Open the battery
compartment cover.
2. Install two new batteries, make sure that battery polarity
matches with the “+”, “-“ marks inside the battery. Or not it
could damage the unit.
3. Close the battery compartment cover.