Ricoh MP 2000LE User Manual
Page 8
How To
Transmit a Memory
Transmission Fax
MP 2000Le
1
2
3
4
5
Make sure that the memory
transmission indicator is lit.
Place the original into the document feeder (Face Up) or on the glass (Face Down)
Dial the number required using the blue number keys, quick dial keys or speed dial keys.
Press the Start Key
The fax is now stored in the machines memory. If the transmission was not successfully sent
with the first attempt, then the machine will redial at 5 minute intervals, another 5 times. After this
an error message will be printed and the fax will be deleted out of the machines memory
Ensure that you are in Fax Mode, if you are not then press the Facsimile Key.
NOTE: If you wish to send the same message to more than one destination, press the OK
key and dial another destination. Repeat this step for all destinations.