Roadmaster RMCD100M - Manual (Page 12)

MAINTENANCE
Cleaning the Unit
Do not use any liquids to clean this unit.
Do not use petroleum distillates to clean
this unit. Use a clean, dry cloth to clean
this unit.
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fuse(s).
If the fuse is bad, check the power connec-
tion and replace the fuse with a new one. If
the same problem occurs, this might indi-
cate a malfunction within the unit.
Warning
When replacing a fuse, do not use a fuse
with a higher amperage rating than the
fuse originally supplied to your unit, other-
wise damage will result to your unit.
Simple Troubleshooting Guide
PROBLEM CAUSE/SOLUTION
No Power Check wiring connections.
Check and make sure the fuse is not blown.
Replace with the proper rating/size fuse.
Some errors occur in the LCD or
nothing functions when buttons
are pressed. Press the RESET Button.
Unable to receive stations Check and make sure the antenna is con-
nected properly.
Poor radio reception Check and make sure the antenna is the
correct length. Make sure the antenna
is not broken. If the antenna is broken,
replace it. The antenna is poorly ground-
ed. Check and make sure the antenna is
grounded at mounting location.
CD’s cannot be loaded A CD is already loaded in the player. Eject
CD.
Songs keep skipping The CD is dirty or damaged.
File information shows in LCD but
will not play. Your file may be corrupt.
11