Basic operation, Sound characteristics – Roadmaster RMCD100M User Manual
Page 10
Basic Operation
1. Turning the Unit On / Off
Press the power button to turn the unit on,
press the POWER button again to turn the
unit off.
2. Mode Selection
Press the BAND Button to select Radio
Mode.
Press the Play / Pause Button to when
there is a CD in the unit to start playing
the CD.
Press the AUX Button when there is an
audio source plugged into the Auxiliary
Input Jack.
Sound Characteristics
Use the SEL Button to access the units
sound characteristics. Each time you
press the SEL Button the unit advances to
the next adjustable sound characteristic.
1. Volume
Press the SEL Button until the display
shows “VOL”. Use the VOL + / - Buttons to
adjust the Volume level. The Volume levels
are 0 - 63, the larger the VOL number, the
higher the Volume level.
2. Bass
Press the SEL Button until the display
shows “BAS”. Use the VOL + / - Buttons
to adjust the Bass level. When DSP is ON,
bass control is not available.
3. Treble
Press SEL Button until and the display
shows “TRE”. Use the VOL + / - Buttons to
adjust the Treble level. When DSP is ON,
Treble control is not available.
4. Balance
Press SEL Button until the display shows
“BAL”, then use the VOL +/- Buttons to
adjust the volume balance between the
left & right speakers.
5. Loudness Control
Press the LUD/RDM Button to emphasize
the Bass output, the word “LOUD” on the
display indicates that the loudness func-
tion is on. Press again to cancel.
6. Mute
Press the MUTE Button to turn the volume
off. Press this button again to turn the vol-
ume on again.
7. Preset Equalizer Function
Press the EQ Button to choose the EQ
mode between POP, CLASSIC, and ROCK.
POP, CLS, or ROC will show on the display
indicating which equalizer setting is in use.
8. Clock
The clock can be set anytime when the
power is on. Press and hold the CLK but-
ton, the time will blink on the display.
1. Press the |<< Button to adjust the hour.
2. Press the >>| Button to adjust the minute.
3. Press the CLK Button again or leave the
unit idle for new setting to effect. Press
the CLK Button anytime to view the time
clock display.
9
VOL BAS TRE BAL