Radio Shack 43-3808 - Manual (Page 17)

17 Operation
The system announces the day and time the message was re-
corded. After you play all the new messages, the display shows
the total number of recorded messages, and the system auto-
matically saves the messages and resets to answer calls.
Note: If there are no messages, the system sounds two tones.
To pause while listening to message, press PLAY/PAUSE/MIN . P
appears on the display. The playback resumes when you press
PLAY/PAUSE/MIN again, or the system returns to answer-ready
mode after 7 seconds if you do not press PLAY/PAUSE/MIN
again.
To replay the messages, press PLAY/PAUSE/MIN .
During message playback, you can repeat the current message
by pressing
REPEAT/ANNC/DAY , repeat a previous message by
holding down REPEAT/ANNC/DAY for over 1 second, or skip for-
ward to the next message by pressing SKIP/TIME SET/CHECK .
To stop message playback at any time, press ON/OFF/STOP .
Note: Each message will be treated as a new message until
you play back the entire message.
DELETING MESSAGES
You can delete messages individually during playback, or all at
once after playback.
To delete a particular incoming message, memo, or two-way
phone conversation (after listening to it), press
DELETE during
playback.