Radio Shack 43-3808 - Manual (Page 10)

10 Preparation
the display. Repeatedly press MEMO/2 WAY/HOUR until you
hear or see the correct hour.
4. While holding down SKIP/TIME SET/CHECK, press PLAY/
PAUSE/MIN . The system announces “01”. 01 appears on
the display. Repeatedly press or hold down PLAY/PAUSE/
MIN until you hear or see the correct minute.
Note: When you hold down PLAY/PAUSE/MIN , the system
will move forward by 10 minutes until it reaches 00.
5. Release SKIP/TIME SET/CHECK . The system announces
the day and time you set.
6. To hear the current day and time, press SKIP/TIME SET/
CHECK while the system is on or off.
Note: If you have not set the day and time and you press SKIP/
TIME SET/CHECK , the system announces “Please set time”.
SETTING THE NUMBER OF RINGS
To control how long the system waits before it answers a call,
slide
RING SELECT on the system’s right side to the desired
number of rings ( 2 , 4 , 7 or TS ).
TS (Toll Saver) – If you choose the Toll Saver option, and there
are new messages, the system answers after two rings. Other-
wise, the system answers after four rings. This lets you avoid
unnecessary charges when calling by long distance to check
your messages. If you hear more than two rings, you know you
can hang up because the system has no new messages.