Radio Shack CD-3318 - Manual (Page 8)

8
RADIO OPERATION
Warning: To protect your hearing, set
VOLUME to its lowest setting before
you turn on the radio.
Follow these steps to use the radio.
1. Set RADIO.CD OFF to RADIO to
turn on the radio. The POWER
indicator lights.
2. Set BAND to FM or AM .
3. Adjust TUNING to the desired sta-
tion.
4. Set BEAT CUT to 1 or 2 for stereo
sound on FM stations.
Notes:
• The FM-STEREO indicator
lights when you receive an FM
signal in stereo.
• If FM stereo reception is noisy,
set BEAT CUT to 0 . The sound
is no longer in stereo, but
reception should improve.
• For the best AM reception,
rotate the CD-3318 to position
the built-in AM antenna.
• For the best FM reception, fully
extend the telescoping anten-
na and swivel it to the position
that produces the best recep-
tion.
5. Adjust VOLUME and TONE to the
desired levels.
6. Press E-BASS to enhance the
bass sounds while playing the
radio. Press the button again to
turn the extended bass
system off.
7. Set RADIO.CD OFF to TAPE to turn
off the radio.
14-542.fm Page 8 Wednesday, June 30, 1999 3:38 PM