Radio Shack ET-546 User Manual

Page 7

2. Route the short cord downward

through the slot on the base’s bot-
tom and under the clips as shown.

3. Route the other end of the short

cord through the hole in the
bracket’s center.

4. Attach the supplied bracket to the

bottom of the base by inserting
the tabs on the bracket into the
slots on the base, then sliding the
bracket up.

5. Insert the supplied AC adapter’s

barrel plug into the

12VDC

jack on

the back of the base. Then plug
the adapter into a standard AC
outlet.

6. Plug the modular cord into the

wall plate’s jack.

7. Align the bracket’s keyhole slots

with the wall plate studs and slide
the base downward to secure it.

43-1046.fm Page 7 Tuesday, August 17, 1999 11:05 AM