Rosewill RC216 User Manual
Page 12
10
User Manual
SATA II / ATA 133 PCIe Card RC216
For An Existing Installation
1. Setup the RAID Array prior to driver installation and boot up to Windows.
2. At the
Found New Hardware Wizard window pop-up, please click Cancel button to cancel
the driver installation for the device at this moment. The driver for this device will be installed in
the next step.
3. Please insert the CD driver bound with PCIe SATA II 300 + PATA Raid Card into your CD-ROM
Drive.
4. At the Windows desktop, click
Start, then Run.
5. Type
D:\ RC-216\Setup.exe, click OK. (Change D:\ to match your CD-ROM drive letter)
6. Follow the on-screen instructions to complete the installation.
7. Restart Windows to complete the installation.
To Verify Driver Installation
Click on the “
Device Manager” tab in System Properties, which you access from the Windows
Control Panel. You should see a “
JMicron JMB36X Controller” installed under “SCSI and RAID
controllers (Storage controllers – Vista)
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/
for complete warranty information and future support for your product.
If you have any question while using our products, please feel free to contact us at [email protected]