beautypg.com

Features, Assembly – RIDGID R6300 User Manual

Page 9

background image

8

9

FEATURES

KNOW YOUR IMPACT WRENCH

See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.

SWITCH TRIGGER

The rocker-type switch trigger is located on the handle of the
tool and is reversible for changing the direction of rotation.

TWO SPEED SWITCH

The impact wrench has a two-speed motor designed for op-
eration at

LO (1) or HI (2) speeds. A slide switch is located on

top of the wrench to select either

LO (1) or HI (2) speeds.

DRIVE SHANK

The square 1/2 in. drive shank with detent retention pin pro-
vides easy installation and removal of sockets by pushing
them on or pulling them off the shank.

POWER CORD

Your impact wrench has a 12-foot power cord. The shape
of the plug is designed not to snag on your work.

LIGHTED PLUG

The lighted plug helps to easily identify live tools.

REPLACEABLE BRUSHES

Externally accessible brushes extend the life of the ma-
chine.

UNPACKING

This product has been shipped completely assembled.
n

Carefully remove the tool and any accessories from the

box. Make sure that all items listed in the packing list are
included.

n

Inspect the tool carefully to make sure no breakage or

damage occurred during shipping.

n

Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the tool.

n

If any parts are damaged or missing, please call

1-866-539-1710 for assistance.

PACKING LIST

1/2 in. Impact Wrench
Carrying Case
Operator's Manual

ASSEMBLY

WARNING:

If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to
do so could result in possible serious personal
injury.

WARNING:

Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.

WARNING:

Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.