Radio Shack 63-969 - Manual (Page 10)

10
Caution: The projection arm moves about 90 degrees in
either direction. Do not force it.
To focus the time on the desired position, adjust FOCUS
on the side of the projection arm.
To turn off the projection light, slide PROJECTION LIGHT
ON toward the projection arm.
With the projection light off, you can also project the time
by pressing
SNOOZE/LIGHT . The projector lights for about
5 seconds then automatically turns off.
USING THE ALARM
Setting the Alarm Time
Note: If you do not press a button within about 90 sec-
onds after you pressed the previous button, the clock ex-
its its alarm setup mode. Start over at Step 1.
1. Hold down ALARM STOP/ALARM SET until the alarm
time and appear. The hour digit flashes.
2. Hold down or repeatedly press + . appears and the
alarm hour advances by 1 with each press.
63-969.fm Page 10 Monday, September 27, 1999 9:19 AM