Radio Shack 43-3558 - Manual (Page 20)

Me
mory Dial
ing
20
3. Press MEM or SELECT .
4. Press MEM or SELECT . A cursor flashes
indicating that the display is ready for
the name to be entered.
If “ Edit Memory X X ” appears, the
selected memory location is already
stored. Then you must either edit the
entry in this location, delete the entry in
this location, or select ¨
Go Back ¨ to
choose another location.
5. To enter a name (up to 13 characters),
use the number keys.
• See “Steps for Entering Names and
Special Characters” on page 21.
• Use #/> and /TONE/< to move the
cursor to the desired location.
• Use CH/DELETE to delete characters
as needed.
• Press and hold CH/DELETE to delete
all the characters.
• If a name is not required, go to step
6.
6. Press MEM or SELECT . ¨ Store
Number ¨ is displayed.
The cursor flashes indicating that the
display is ready for the number to be
entered.
7. Use the number keys to enter the
phone number.
• The phone number cannot exceed
20 digits.