Radio Shack 43-3558 - Manual (Page 19)

Memory
Diali
n
g
19
• If you are not sure of your dialing
system, set for tone dialing. Make a
trial call.
If the call connects, leave the setting
as is, otherwise set for pulse dialing.
• If your phone system requires pulse
dialing and you need to send the
DTMF tones for certain situations
during a call, you may “switch-over”
to tone dialing. (Refer to “Tone
Dialing Switch-over” on page 15.)
Setting the Language
1. When the phone is in the standby
mode, press and hold CID/MENU .
2. Press VOL key four times to select
¨ Language ¨.
3. Press SELECT to toggle between
¨ Eng ¨(English), ¨ Fr. ¨(French) and
¨ Esp ¨(Spanish) for each setting.
4. Press END or return the handset to the
base unit to complete the setting. The
handset returns to the standby mode.
MEMORY DIALING
S
TORING
P
HONE
N
UMBERS
AND
N
AMES
Memory Dialing allows you to dial a number
using just a few key presses. Your cordless
telephone stores up to ten names/numbers
in the handset.
Ô
1. Press MEM , ¨ Select Memory ¨ is
displayed.
2. Press VOL or VOL keys, or enter a
number ( 0 - 9 ) to select the memory
location where you would like to store
the number.
Ô
NOTE
Ô
In memory dialing
operation, you must press
a key within 30 seconds or
the phone will return to the
standby mode. If you
return the handset to the
base, the phone will return
to the standby mode also.