Renesas M32173T-PTC - Manual (Page 4)

( 2 / 5 )
1. Outline
The M32173T-PTC is a converter for featuring the debug-
ging function such as real-time tracing when using emulators
M32170T-SDI or M32100T-SDI-E with the M32173F2VFP
or M32172F2VFP.
2. Package Components
(1) M32173T-PTC converter
(2) YQPACK144SD (made by Tokyo Eletech Corporation)
(3) NQPACK144SD (made by Tokyo Eletech Corporation)
(4) YQ-GUIDE (4 pieces)
(5) Screwdriver (made by Tokyo Eletech Corporation)
(6) M32173T-PTC User's Manual (This manual)
3. Specifications
Table 1 Specifications
4. Usage
The M32173T-PTC can be used for debugging and board
mounted evaluation in common by mounting the
NQPACK144SD on the target board.
(1) For debugging
Mount the NQPACK144SD (included with the M32173T-
PTC) on the 144QFP foot pattern of the target board.
Then connect the M32173T-PTC via the YQPACK144SD.
As the M32173F2VWG is mounted on the M32173T-
PTC, all functions of the emulator such as real-time
tracing can be used.
(2) For board-mounted evaluation
Mount the M32173F2VFP (or M32172F2VFP) and the
HQPACK144SD (separately available) in that order on
the NQPACK144SD on the target system.
Before using the M32173T-PTC, be sure to read "8. Precau-
tions" on page 5.
Figure 1 Package components of M32173T-PTC
Figure 2 Usage of M32173T-PTC
M32173T-PTC
YQ-GUIDE (x4)
Screwdriver
YQPACK144SD
NQPACK144SD
Applicable package
Supported MCU
Supported emulator
Mounted MCU
Clock
Power supply
144P6Q-A
(144-pin 0.5-mm-pitch QFP)
M32173F2VFP/M32172F2VFP
M32170T-SDI
M32100T-SDI-E
M32173F2VWG
10 MHz
Supplied from target board