Runco VX-4c - Manual (Page 37)

OPERATION
Double slidebars - In double slidebars, such as the
pixel tracking/pixel phase double slidebar, adjust the
top slidebar with or as desired. When you
have finished with the top slidebar (whether changed
or not), adjust the bottom slidebar with .
When you are done, press to return to your pres-
entation. For fast continuous adjustments, hold down
the desired arrow key.
"Direct" slidebars - For quick access, you can often use a slidebar (or double slidebar) without
traveling the menu system. For example, simply press to immediately display the same con-
trast slidebar accessed with the Contrast option in the Image Adjustments menu. Direct slidebars
are listed below.
Use the arrow keys to adjust a direct slidebar, or press and enter a specific number from the
keypad , then or or to save ( or to cancel). When you are done, press to
save and return to your presentation.
NOTES: 1) You can still adjust a direct slidebar as usual if the menu display is turned off (see
or OSD Settings menu) - the slidebar just won't be visible. 2) A direct slidebar disappears
if it is not used within 5 seconds.
Checkboxes - Conditions are present if its adjacent checkbox contains a checkmark. To toggle
the checkbox, simply highlight and press , or highlight and use to check and to
uncheck. For a checkbox that is numbered, simply enter the number of the option to toggle the
checkbox.
Pull-down lists - To see a pull-down list of options available for a given parameter labeled with
a T, you can:
Highlight it and press
Or enter the menu option number.
Use keys to navigate up and down within the list (the current choice is noted
with a small X). Press to choose an option from the list, if desired.
OFF ON
or
Exit
Cont
Enter
Enter Exit
OSD*
Enter
Enter
OFF ON
or
Enter
LIST OF DIRECT SLIDEBARS
H-Shift or V-Shift
Pixel Tracking or Phase
Volume
Contrast
Brightness
Color
Tint
Detail
Position
Pixel
Vol
Cont
Bright
Color
Tint
Detail
3-11
Enter