Installation and setup – Runco VX-4c User Manual

Page 10

Text mode
Original mode

INSTALLATION AND SETUP

IF ZOOM LENS: Access to the 3 lens mount

screws is likely blocked by the toothed zoom ring
in front of it. First rotate the zoom ring by hand
until its 3 access holes align with the screws, then
insert the hex socket ball driver through the holes
to loosen the screws-do not remove. See figure to
the right.

STEP 3

Rotate the lens barrel slightly

Using both hands, rotate the lens barrel counter-

clockwise until the screw heads align with the larg-
er end of their slots on the lens.

Align zoom gear ring to access 3 screws

-ZOOM LENS-

Rotate Slightly

2-3