RCA 25204 User Manual
Page 28
2
Storing the Last Number Dialed
1. Press the Store button.
2. Press the Auto Redial button to view the last number dialed.
3. Press Sel/Save to save the number.
4. Follow the steps in “Storing a Name and Number in Memory” section to continue the
name editing and save the record.
Storing a Pause
Use the PAUSE button (displays as “P”)to insert a pause when a delay is needed in the
dialing sequence (for example, when you must dial a 9 to get an outside line or when you
must enter codes to access your bank’s information line).
Dialing a Stored Number
If the number is stored in the Directory Memory,
1. Pick up the handset, or press SPEAKER or HEADSET.
2. Wait for the dial tone.
3. Press the DIR button, and use the 5 and 6 button to find the number.
4. Press the DIAL button and the number automatically dials.
If the number is stored in the Direct Access Memory,
1. Pick up the handset, or press SPEAKER or HEADSET.
2. Wait for the dial tone.
3. Press the MEMORY location button, and the number automatically dials.
Chain Dialing
This process allows you to dial a succession of stored numbers from separate memory
locations. This is useful when you must dial several sequences of numbers, such as with
frequent calls via a telephone company long distance provider.
For example
Memory location
Local access number of long distance company
6
Authorization code (ID)
7
Long distance phone number
8
Memory