RBH Sound A-615-70 - Manual (Page 7)

5
VOLTAGE SELECTOR
s previously mentioned, the A-615-70 and MC-615-70 can be used in
a 70 volt system or as a standard 8 Ohm in-ceiling loudspeaker. The
voltage selector knob allows you to properly set the speaker to 8 Ohm operation
or to choose from 2, 4, 8, 16 and 32 Watt taps in 70 volt operation.
In 70 volt operation, be sure to appropriately set the selector according to the
power output of the amplifier being used and the number of speakers being
installed. In 8 Ohm operation, be sure to set the selector to the 8 Ohm setting.
A picture of the voltage selector (set to 8 Ohms) is shown below.
S T R A I N R E L I E F
he pictures below depict the proper way to insert and tighten down the
wire in the strain relief fitting.