RBH Sound A-615-70 - Manual (Page 5)

3
THE REMOVABLE CONNECTOR
his connector detaches from the main housing of the speaker for ease
in connecting the speaker wire. The bare wire must be inserted and
securely fastened by tightening the screws. The connector has 4 terminals
as shown in the diagram below.
Positions 2 and 3 are inputs from either the amplifier or a previous speaker.
They are the same inputs used for 8 Ohm operation. Positions 1 and 4 are
outputs to succeeding speakers in 70 volt operation. We suggest carefully
reading the WIRING DIAGRAM section of this manual to determine the best
wiring scheme for your particular installation.
This removable connector will accept a maximum wire gauge of 14 AWG and
a minimum wire gauge of 18 AWG. Please refer to the NEC (National Elec-
trical Code) for further information regarding the permissable wire size.
OUT IN IN OUT