RCA 25202 - Manual (Page 14)

14
Connections and Setup
Regional Area Codes
Depending on your area, you may need to set regional area codes. These are needed in
order for the phone to determine the number format to display when a valid CID signal is
received. Calls received that match any of the regional area codes display as 10 digits. If
the number is not displayed correctly, the phone may not be able to dial back the number.
You can store up to 6 regional area codes.
You may need to use this feature if you have:
• Multiple area codes
• Overlapping area codes
• Areas that require 10-digit dialing.
1. Press the MENU button.
2. Use the REVIEW or button to scroll to REGION CODE.
3. Press SELECT.
4. Use the REVIEW or to scroll to desired code #.
5. Press SELECT.
6. Use the touch-tone pad to enter the code. Press DELETE to clear and re-enter all
three digits.
7. When finished, press SELECT to save and return to CODE # x.
Display Contrast
1. Press the MENU button.
2. Use the REVIEW or to scroll to CONTRAST.
3. Press SELECT. “------” is displayed to show the current contrast level.
4. Use the REVIEW or to increase or decrease the display contrast.
5. When finished, press SELECT to save. To start over, press EXIT to return to the
CONTRAST menu and repeat step 3.