Radio Shack TAD-1016 - Manual (Page 8)

8
4. Route the adapter’s cord through
the strain relief slot on the back of
the base.
5. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
6. Fully extend the base’s antenna
and place it in a vertical position.
Mounting the Base
on a Wall Plate
To make this connection, you need a
short modular cord such as Ra-
dioShack Cat. No. 279-390 (not sup-
plied).
1. Plug one end of the modular cord
into the TEL LINE jack on the back
of the base.
Strain Relief Slot
43-775.fm Page 8 Friday, August 13, 1999 3:25 PM