Rimage 360i - Manual (Page 7)

Introduction
Introduction
This manual provides the information needed to operate the Rimage 360i and identify the parts.
To set up and install your Rimage 360i, refer to the Rimage 360i Setup and Installation Guide.
Requirements
Software requirements
The Rimage 360i will operate only with the Rimage 360i Software.
Operating System requirements
The Rimage 360i and software run only on Windows 2000, and Windows XP, and Windows 2003.
Media requirements
You must use discs that are coated with a surface that is designed for inkjet printing. The media
that is in Rimage Media Kits
™ is designed for optimum use in the Rimage 360i.
Ink requirements
The following cartridge combinations are supported. The printer will work only with
the following printer cartridges.
Description Rimage Part #
Black RB1
Color RC1
Photo RP1
Left Position Right Position
Color Black
Color Photo
Color No cartridge
No cartridge Black
n
Warning:
ƒ Ink may be harmful if swallowed.
ƒ Avoid contact with eyes.
ƒ Ink contains nitrites. If ingested, seek immediate medical attention.
ƒ Keep out of reach of children.
ƒ Refilling ink cartridges may result in damage to the cartridge or printer.
ƒ Rimage ink cartridges are not licensed for modification.
-
Important! You can use only Rimage ink cartridges in the Rimage 360i.
110808_C 1