Rimage 360i - Manual (Page 17)

Operate the Rimage 360i
Adjusting the ink volume used
This functionality allows you to adjust the amount of ink that is used.
1. Navigate to Printing Preferences (refer to page 9).
2. Select the Basics tab.
3. Select Advanced Features. The Advanced Features window opens.
4. To increase or decrease the ink volume or dry time, move the Ink Volume and Dry Time
sliders.
-
Important! Do not select the Low Memory checkbox.
5. Select OK. The Advanced Features window closes.
8. When you have made the desired choices, select OK. The Disc Color 360i Properties window
closes.
Setting up color options
This functionality allows you to toggle between color and grayscale printing, select the type of
color space your labels require, and adjust some color attributes.
1. Navigate to Printing Preferences (refer to page 9).
2. Select the Color tab.
3. Turn Print in Grayscale on or off.
a. In the Color Options box, select or clear the Print in Grayscale checkbox.
b. If you selected the checkbox, select the appropriate radio button for your print type.
4. To adjust color attributes, move the Saturation, Brightness, and/or Color Tone sliders to
the desired position.
5. If necessary, select the appropriate Color Space from the drop-down list.
6. When you have made the desired choices, select OK. The Disc Color 360i Properties window
closes.
110808_C 11