Renesas Converter Board M3T-F160-100NRB - Manual (Page 4)

1. Outline
The M3T-F160-100NRB is a converter board for connecting
the 160-core flexible cable FLX160 to a foot pattern for
100-pin 0.65-mm-pitch QFP (PRQP0100JB-A, formerly
100P6S-A and PLQP0100JA-A, formerly 100P6A-A).
2. Package Components (See Figure 1)
(1) M3T-F160-100NRB converter board.......................... 1 pc.
(2) YQPACK100RB
(made by Tokyo Eletech Corporation)
................ 1 pc.
(3) NQPACK100RB
(made by Tokyo Eletech Corporation)
.............. 1 pc.
(4) YQ-GUIDE-1
(YQ-GUIDE x 4)
...................................... 1 pkg.
(5) M3T-F160-100NRB User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable package
PRQP0100JB-A,
formerly 100P6S-A
PLQP0100JA-A,
formerly 100P6A-A
(100-pin 0.65-mm-pitch QFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The M3T-F160-100NRB can be used for debugging and
board-mounted evaluation in common by mounting the
NQPACK100RB on the user system.
(1) For
debugging
Mount the NQPACK100RB on the foot pattern of the user
system and attach the YQPACK100RB on it. And connect
the probe of the emulation pod to the upper connector of
the M3T-F160-100NRB. Then connect the
YQPACK100RB and the M3T-F160-100NRB.
(2) For
onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK100RB168 (separately available)
in that order on the HQPACK100RB1622 (separately
available) on the user system.
Use the applicable HQPACK for your package.
- PRQP0100JB-A (formerly 100P6S-A) package:
HQPACK100RB168
- PLQP0100JA-A (formerly 100P6A-A) package:
HQPACK100RB1622
Before using the M3T-F160-100NRB, be sure to read "7.
Precautions" on page 4.
M3T-F160-100NRB
YQ-GUIDE -1
YQPACK100RB
NQPACK100RB
Figure 1 Package components of the M3T-F160-100NRB
(1) For debugging
YQ-GUIDE-1
YQPACK100RB
NQPACK100RB
(2) For on-board evaluation
HQPACK100RB168
(not included)
or
HQPACK100RB1622
(not included)
MCU with on-chip flash
memory one-time PROM
●
: No. 1 pin
Be sure to align the pins.
FLX160-PRB,
M3xxxxTx-EPB
or
M3xxxxTx-CPE
M3T-F160-100NRB
100-pin 0.65-mm-pitch
(PRQP0100JB-A,
formerly 100P6S-A) foot pattern
Figure 2 Usage of the M3T-F160-100NRB
(2/4)