RCA RS-1247 - Manual (Page 21)

21
display messages in cd mode
The following are some of the messages you may see when the system is in CD
mode. Refer to the descriptions below when you see a message on display.
This message is displayed when:
STBY the system is in Standby mode.
OPEN the CD compartment tray is opening.
CL the CD compartment tray is closing.
READ the system is reading the content of a disc.
MUTE the Mute function is activated. Also refer to page
18, step 3 of section For Sound Effect and
Volume Adjustments for a more detailed
functional explanation.
ERR the CD compartment tray is obstructed as it opens
or closes. Press OPEN/CLOSE to re-open or re-close
the CD compartment tray. This cancels the error.
FULL the system’s (CD mode) track memory has reached
its limit and cannot store any more tracks.
CLR you clear a stored program. In program mode,
press and hold STOP for about 1 second, the
display shows this message to indicate that the
program is being cleared.
EMP you try to select program play while no program
has been stored in memory.