RCA ViSYS 25110 - Manual (Page 27)

2
Caller ID
Deleting All Records
1. Make sure the phone is
OFF (not in TALK mode).
2. Use the CID/Vol ( 5 or 6 ) buttons to display any Caller ID record.
3. Press and hold the Mute/Del button until the unit beeps and DELETE ALL? shows
in the display.
4. Press Mute/Del again to erase all records. You will hear a confirmation tone, and
the display shows NO CALLS.
Dialing a Caller ID Number
1. Make sure the phone is OFF (not in TALK mode).
2. Use the CID/Vol ( 5 or 6 ) buttons to display the Caller ID record you want to
dial.
3. Press the Talk or Headset button on the handset. The number dials
automatically.
Changing the CID Number Format
The format button lets you change the format of the displayed CID number. The
available formats are as follows.
7-digit 7-digit telephone number.
10-digit 3-digit area code + 7-digit telephone number.
11-digit long distance code “1” + 3-digit area code + 7-digit telephone number.
1. Use the CID/Vol ( 5 or 6 ) buttons to scroll to the number you want to call
back.
2. If the number does not dial as shown, press the format button. Repeat if
necessary, until the correct number of digits show in the display.
3. Press the Talk or Headset button on the handset. The number
dials automatically.