Radio Shack 240 - Manual (Page 15)

15
CONNECTING TO AN ANSWERING MACHINE
1. Unplug the answering machine’s cord
from the phone line jack, then plug the
cord into the module’s
PHONE jack.
2. Plug one end of the supplied phone
cord into the WALL jack on the mod-
ule. Then plug the other end of the
cord into the phone line jack.
3. Set the answering machine to answer
calls after at least two rings.
Note: If you connect a telephone answering machine to the same line as
the Caller ID System 240, you must set the answering machine to answer
in two or more rings in order to receive the Caller ID information.
D EL ET E R EV IE W
43-962A.fm Page 15 Monday, August 16, 1999 3:33 PM