Radio Shack 240 - Manual (Page 14)

14
2. Plug the phone’s cord into the L1 + L2 jack on the adapter.
3. Plug one end of the supplied modular cord into the module’s WALL jack.
4. Plug the other end of the modular cord into either the L1 or L2 jack on the
adapter, depending on which line’s calls you want to monitor.
Note: You can also connect two
modules (one module for each
line) as shown here. Each module
shows information for the line you
connect it to. Simply plug the oth-
er module into the remaining jack
(L1 or L2) on the adapter.
D EL ET E R EV IE W
D EL ET E R EV IE W
43-962A.fm Page 14 Monday, August 16, 1999 3:33 PM