Masks, Humidifier, Resscan data card – ResMed Positive Airway Pressure Device VPAP IV ST User Manual
Page 5: Supplemental oxygen
2
Masks
The following ResMed mask systems are recommended for use with these devices:
For information on using masks, see your mask manual. For the latest available
masks, see www.resmed.com.
Humidifier
If you are experiencing dryness of the nose, throat or mouth, the H4i heated
humidifier is recommended for use with these VPAP devices.
!
WARNING
•
Only ResMed mask systems are compatible for use with these VPAP devices.
•
Only the H4i is compatible for use with these VPAP devices.
ResScan Data Card
The ResScan Data Card may be used with these VPAP devices either to help your
clinician to monitor your treatment or to provide you with updates to your device
settings.
Supplemental Oxygen
The VPAP IV and VPAP IV ST are designed to be compatible with up to 15 L/min of
supplemental oxygen. At a fixed flow rate of supplemental oxygen flow, the inhaled
oxygen concentration will vary, depending on the pressure settings, patient breathing
pattern, mask selection, and the leak rate.
!
WARNING
Always use the ResMed Oxygen Connector Port when adding supplemental
oxygen at the flow generator outlet.
Screen
Keypad
Air outlet
DC
AC
Air inlet
Data Card
module
Carry handle
Mask Type
Name
Nasal Masks
• Mirage Vista™ Nasal Mask
• Ultra Mirage™ Nasal Mask
• Ultra Mirage™ II Nasal Mask
• Mirage Activa™ Nasal Mask
• Mirage Micro™ Nasal Mask
Nasal Pillows Systems
• Mirage Swift™ Nasal Pillows System
• Mirage Swift™ II Nasal Pillows System
Full Face Masks
• Mirage™ Liberty Full Face Mask
• Mirage™ Quattro Full Face Mask
• Ultra Mirage™ Full Face Mask