Ruckus Wireless MM2211 - Manual (Page 24)

24 MM2211 Wireless Broadband Gateway User’s Guide 8000013, July 2006
Configuring the MM2211 Gateway
Configuring the MM2211 Gateway
This section describes the tasks and screens used to customize the MM2211 Gateway configuration to run
on your wireless network.
Review the following topics before you change any system configuration settings:
• "Connecting to the MM2211 Gateway" on page 15
• "Accessing the Web Interface" on page 17.
System Configuration
Table 5, “MM2211 Gateway Default and User Settings Worksheet,” on page 21 shows the default settings
used to login to the device.
A minimum set of configurations is required to put the MM2211 Gateway into operational mode. The system
provides the default settings for these configuration items. You should change the default settings where
necessary to match your own wireless network’s configuration, and to protect your privacy.
A system reboot is required for configuration changes to take effect. Follow the following steps to configure
the MM2211 Gateway:
1. Connect to the MM2211 adapter by following the instructions in "Connecting to the MM2211 Gateway" on
page 15 .
2. Choose Configuration->System. The window of Figure 5 appears.