RCA Satellite TV System - Manual (Page 57)

Chapter 4 55
Using On-Screen Menus
System Index
The System Index feature allows you to get detailed information about your digital satellite
receiver.
Details that can be viewed from within the System Index menu include program guide
information, details about the menu system, explanations of the remote control, front panel, and
back panel of the receiver, and even a glossary of words common when discussing digital satellite
receivers.
System Options
The System Options feature allows you to set a default on-screen display language, choose a
receiver output channel (the channel that the TV views satellite broadcasting), set up the remote
control, select a default picture size, and set the time zone.
Use the remote control’s arrow and OK buttons to navigate through these menus, or you can use
the digit buttons on the remote control to select a numbered on-screen item.
Languages
This menu allows you to select menu and audio languages. You can choose
between English and Spanish for the menu language.
You can choose from a variety of audio languages to be heard if a program is
simulcast in that language. If that language is not available for that broadcast,
the programming will be heard in its default language.
Output Channel
This feature allows you to change the TV channel to which the satellite receiver
broadcasts its signal. The default setting is channel 3, which means the TV must
be tuned to channel 3 to see the satellite receiver’s picture.
Note: If you used A/V cables to connect your digital satellite receiver to your
TV, then you must use the TV’s video line input to see the satellite broadcast.
Remote Setup
This allows you to choose which remote control button will control the digital
satellite receiver. You can choose between SAT and AUX buttons. The default is
SAT.
Use the remote control’s arrow and OK buttons to make your choice and follow
the on-screen instructions.