Renesas M3T-FLX-120NSE - Manual (Page 5)

(3/4)
5. Connection Procedure (See Figure 3)
The procedure for connecting the M3T-FLX-120NSE is shown
below.
(1) Mount the NQPACK120SE on the target system.
(2) Attach the YQPACK120SE on the NQPACK120SE.
(3) Secure the four corners of the YQPACK120SE with the
YQ-GUIDE's.
● Do not use the screws included with the
YQPACK120SE for fixing the YQPACK120SE.
● The screwdriver included with the NQPACK120SE is
used for fixing the HQPACK120SE. Do not use if for
fixing the YQ-GUIDE's.
(4) Connect the probe of the emulation pod to the
M3T-FLX-120NSE.
(5) Attach the M3T-FLX-120NSE on the YQPACK120SE.
Figure 3 Connection procedure of the M3T-FLX-120NSE
6. External Dimensions and a Sample Foot Pattern
Figure 4 External dimensions and a sample foot pattern of the M3T-FLX-120NSE
YQ-GUIDE (x4)
(1)
(2)
(3)
(5)
(4)
Be sure to use a
slotted screwdriver.
Probe of emulation pod
M3T-FLX-120NSE
YQPACK120SE
NQPACK120SE
120-pin 0.4-mm-pitch
(120P6R-A) foot pattern : No. 1 pin
Be sure to align the pins.
55.0 21.8
40
.0
5.
3
0.225
0.4
13.0
17.0
13
.0
17
.0
Unit: mm
16
.5
40
a 40
b
1a 1b
CN
2
M
3
T-
FL
X-12
0NS
E
RE
V
.A
60
3
1
30 1
61 90
91
1
20
CN
1
M
AD
E
I
N
JA
PAN
40
a 40
b
1a 1b
CN1 CN2