Reebok Fitness 8100 ES RBTL79607.0 - Manual (Page 8)

8
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (55) so that the treadmill is more stable.
Do not fully fold the Frame until the treadmill
is completely assembled.
Attach two Base Pads (81) to the Base (85) with
two #8 x 1" Tek Screws (1).
1
85
55
1
81
5
6. Insert an Extension Leg (97) into the Base (85)
as shown. If necessary, use a rubber mallet to
fully insert the Extension Leg. Next, hold two
Extension Leg Nuts (10) in the bottom of the
Extension Leg, and tighten two 5/16" x 2" Bolts (2)
with two 5/16" Star Washers (9) into into the top
of the Extension Leg.
2
97
9
85
6
7. Attach the Left Upright (111) to the Base (85)
with a 3/8" x 1" Bolt (4), a 3/8" x 2 3/4" Bolt (5),
and two 3/8" Star Washers (8). Start both Bolts
before tightening them.
4
5
111
85
7
81
8
10