Roberts Radio DreamTime2 - Manual (Page 21)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
20
To view the alarm settings
1. Press the On / Standby button to switch on the clock radio.
2. Press and release the Alarm button to enter the alarm setup.
3. Press the Tuning Up or Down buttons to view alarms 1 or 2.
4. Press and release the Select button to cycle through each of the
settings for the chosen alarm.
You may use the Tuning Up and Down buttons to modify any particular
setting if desired, using the Select button to enter the modifi cation.
Snooze function
1. When the radio or buzzer alarm sounds, press and release the Snooze
button. This will silence the alarm for the selected number of minutes.
The Snooze duration can be adjusted between 5 and 20 minutes in
5 minute increments. The default setting is 5 minutes.
When the Snooze button has been pressed during an alarm, the display
will show the Snooze symbol
. This sequence can be repeated
during the 60 minute alarm period.
2. To cancel the Snooze function, press the On / Standby button or press
and hold the Snooze button.
2
3
3
4
2