Unpacking, Applications – RIDGID R3120 User Manual
Page 7
6
7
UNPACKING
INSTRUCTIONS
This tool has been shipped completely assembled except
for the blade.
Carefully remove the tool and accessories from the
box.
Make sure that all items listed in the packing list are
included.
Inspect the tool carefullshy to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
Variable Speed Orbital Jig Saw
Bi-metal blades (3)
Vacuum adaptor
Anti-splintering insert
Hex Key
Case
Operator’s Manual
APPLICATIONS
You may use the orbital jig saw for the purposes listed below:
Sawing non-ferrous metal, sheet steel, wood, plastic, and similar materials.
WARNING:
If any parts are missing do not operate your tool
until the missing parts are replaced. Failure to
do so could result in possible serious personal
injury.
WARNING:
The orbital jig saw should never be connected to
a power supply when you are assembling parts,
making adjustments, cleaning, performing mainte-
nance, or when the tool is not in use. Disconnecting
the tool will prevent accidental starting that could
cause serious injury.