2 ethernet ports – Rugged Outback RS416 User Manual
Page 31
31
2008 RuggedCom Inc. All rights reserved
Rev104
5.3.2 Ethernet Ports
5.3.2.1 Copper Ports
Parameter
Specification
Notes
Speed
10/100 Mbps
Auto-negotiating
Duplex
FDX / HDX
Auto-negotiating
Cable-Type
> Category 5
Shielded/Unshielded
Wiring Standard
TIA/EIA T568A/B
Auto-Crossover, Auto-polarity
Max Distance
100 m
Connector
RJ45
Isolation
1.5 kV
RMS 1-minute
Table 11: Ethernet Ports - Copper Specifications
5.3.2.2 Fiber Optic Ports
The following sections detail fiber optic specifications on ports that can be ordered with the RS416.
The user determines the type of optics at time of ordering and can determine the modules installed
on a particular unit by reading the factory data file via the ROS
TM
user interface. The following
section provides detailed specifications of fiber optic modules.
The dual-port fast Ethernet optical specifications for slots 5 and 6 are shown in Table 12 organized
by module order code. Module order codes are contained within each product’s factory data when
assembled and configured at the factory. Consult ROS
TM
to determine the optical assemblies
installed in a particular product.
Optics
Order Code
Mode /
Connector
Tx
λ
λ
λ
λ
(nm)
Cable
Type
2
(
µ
µ
µ
µm)
Tx Pwr
(dBm)
3
(Min/Max)
Rx
Sensitivity
(dBm)
3
Rx
Saturation
(dBm)
3
Typical
Distance
(km)
1
Power
Budget
(dB)
12-11-0011
MM / ST
850
50/125
-16.5/-10.6
-34
-11.2
2
21
12-11-0012
SM / ST
1310
9/125
-27 / -14
-35
-3
5
8
12-11-0007
MM / ST
12-11-0009
MM / SC
12-11-0008
MM / MTRJ
1310
50/125
-15.7
-33.5
-11
2
17
12-11-0046
MM / LC
1310
50/125
-19 / -14
-32
-14
2
15
12-11-0006
SM / ST
12-11-0005
SM / SC
12-11-0004
SM / LC
1310
9/125
-15/-8
-32
-7
20
16.5
12-11-0031
SM / SC
12-11-0032
SM / LC
1310
9/125
-5 / 0
-35
-3
50
32.5
12-11-0033
SM / SC
12-11-0034
SM / LC
1310
9/125
0 / 5
-37
0
90
39.5
Table 12: Ethernet Ports – Fiber Optic Specifications