Reebok Fitness RL 725 elliptical exerciser RBCCEL79022 - Manual (Page 9)

9
12. Make sure that all parts are properly tightened before you use the elliptical exerciser. Note: Some
hardware may be left over after assembly is completed. Place a mat under the exercise cycle to protect
the floor or carpet.
11. Set the Left Pedal Arm (33) on the left Pedal Cushion
(74), and hold the end of the Left Pedal Arm inside of
the bracket on the Left Pedal Leg (28).
Hold a Pedal Arm Spacer (65) between the Left Pedal
Leg (28) and the Left Pedal Arm (33). Insert the long
part of a Bolt Set (67) through the Left Pedal Leg, the
Pedal Arm Spacer, and the Left Pedal Arm.
Lift the Left Pedal Leg (28), and hold the lower end
of the Left Upper Body Arm (5) inside of the bracket
on the Left Pedal Arm (33). Insert the long part of the
Bolt Set (67) through the Left Upper Body Arm. Hold
another Pedal Arm Spacer (65) between the Left
Pedal Arm and the Left Pedal Leg, and insert the
long part of the Bolt Set through these parts. Tighten
the short part of the Bolt Set into the long part.
Attach the Right Pedal Arm (32) in the same way.
65
65
33
32
28
74
67
67
5
11