Reebok Fitness RL 725 elliptical exerciser RBCCEL79022 - Manual (Page 20)

20
During the pro-
gram, the two hor-
izontal bars in the
matrix will help
you to keep your
heart rate near the
target heart rate.
Note: If the hori-
zontal bars do not
appear in the
matrix, press the
left Mode button
repeatedly until
the Pace indicator is lit; make sure that the Scan
indicator is not lit.
The upper bar in the matrix represents a target
pace, and the lower bar represents your actual
pace. When you hold the handgrip pulse sensor
or wear the chest pulse sensor, the console will
compare your heart rate to the target heart rate
for the current segment. If your heart rate is too
far below or above the target heart rate, the
upper bar will then change in length to prompt
you to increase or decrease your pace. When the
upper bar changes in length, adjust your pace so
that both bars are the same length.
Important:
The target pace is intended only to provide a
goal. Your actual pace may be slower than the
target pace, especially during the first few
months of your exercise program. Make sure
to pedal at a pace that is comfortable for you.
The program will continue until no time remains
in the program.
Note: If you stop pedaling for several seconds, a
tone will sound and the program will pause. To
restart the program, simply resume pedaling.
Monitor your progress with the two displays.
See step 4 on page 14. Note: During heart rate
programs, the upper display will show only your
current pace. If you select a different mode by
pressing the left Mode button, the matrix will
show only a graphic that represents your pulse.
For heart rate programs to function properly, it is
recommended that you leave the pace mode
selected so that the two horizontal bars appear in
the matrix.
Turn on the fan if desired.
See step 6 on page 15.
When the program is finished, the console
will automatically turn off.
See step 7 on page 15.
9
8
7