Ssembly – Reebok Fitness RL 725 elliptical exerciser RBCCEL79022 User Manual

Page 5

Place all parts of the elliptical exerciser in a cleared area and remove the packing materials.

Do not dispose of

the packing materials until assembly is completed.

In addition to the included tools, assembly requires an adjustable wrench and a rubber
mallet .

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 29. The second number refers
to the quantity used in assembly.

Note: Some small parts may have been pre-assembled for shipping. If a

part is not in the parts bag, check to see if it has been pre-assembled.

SSEMBLY

Large M8

Washer (70)–2

Small M8

Washer (71)–2

Pedal Arm

Spacer (65)–4

M4 x 25mm

Screw (96)–2

M6 x 20mm

Screw (75)–4

M4 x 16mm

Self-tapping

Screw (82)—6

M4 x 19mm

Screw (92)–2

M6 Split Washer

(72)–2

M6 x 16mm Button

Screw (93)–2

Bolt Set (67)–2

M10 Nylon

Locknut (85)–4

M8 x 19mm Button

Screw (81)–4

M8 x 25mm Patch

Screw (73)–10

M8 x 19mm Shoulder

Screw (102)–2

M10 Split

Washer (103)–4

Torque Washer

(101)–2

1. Identify the Front Stabilizer (63), which has Wheels

(27) attached to one side. Attach the Front Stabilizer
to the front of the Frame (1) with four M8 x 25mm
Patch Screws (73).