Roberts Radio CR9946 - Manual (Page 8)

7
Setting alarm times
The alarms can be set to wake you by a buzzer, CD or the radio. Your
CD clock radio has two separate alarms which can be set to activate
at different times.
Setting alarm 1
1. Slide the Alarm 1 function switch to the 'Adj' position.
2. Press the UP/F.Skip or DOWN/B.Skip buttons to set the alarm
1 time. Release the buttons when the correct time is reached. The
clock uses a 12 hour display with a PM indicator. Ensure that
the correct 12 hour cycle is selected.
3. Return the Alarm 1 function switch to the 'Off' position. The
display will revert to showing time.
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
Setting alarm 2
1. Slide the Alarm 2 function switch to the 'Adj' position.
2. Press the UP/F.Skip or DOWN/B.Skip buttons to set the alarm
2 time. Release the buttons when the correct time is reached. The
clock uses a 12 hour display with a PM indicator. Ensure that
the correct 12 hour cycle is selected.
3. Return the Alarm 2 function switch to the 'Off' position. The
display will revert to showing time.
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
2
2
2
2
1
3
1
3
cr9946 instruction book.PMD 4/19/2004, 4:49 PM 8