Roberts Radio CR9946 - Manual (Page 17)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
16
Setting the alarms to wake to buzzer
1. Set the alarm time as previously described and ensure alarm mode
is set for correct days of week. Set the Alarm function switch
to the 'Buzz' position. Set the Alarm 1 or Alarm 2 selector switch
to the 'On' position. The Alarm indicator will light.
2. Press the Power button to switch off your CD clock radio.
Important: failure to switch off the power will result in non
operation of the alarm
.
3. The buzzer alarm will sound at the preset time for 60 minutes. To
switch off the alarm until the next day press the Power button. To
switch off the alarms permanently set the Alarm 1 or Alarm 2
function switch to the 'Off' position.
Setting the alarms to wake to radio
1. Set the alarm time as previously described and ensure alarm mode
is set for correct days of week. Set the Alarm function switch
to the 'Music' position.
2. Set the Alarm 1 or Alarm 2 selector switch to the 'On' position.
The Alarm indicator will light.
3. Select the required waveband and ensure that a station is tuned in
and the Volume control is set to the desired level. Press the Power
button to switch off your CD clock radio. Important: failure to
switch off the power will result in non operation of the
alarm
.
4. The radio alarm will sound at the preset time for 60 minutes. To
switch off the alarm until the next day press the Power button. To
switch off the alarms permanently set the Alarm 1 or Alarm 2
function switch to the 'Off' position.
3 3
1
3
3
2
2
1
1
cr9946 instruction book.PMD 4/19/2004, 4:49 PM 17