Job properties cut tab (camm jet / soljet sc-500), Job properties color tab – Roland ColorChoice Ver. 4.5 User Manual

Page 31

Text mode
Original mode

Job Properties Cut Tab (CAMM JET / SOLJET SC-500)

Allows to specify how many times the blade will move over each line (Passes), either advance or not the
media after cutting (Advance after plot), and set the Cutter Driver Options. For more information on Cut Tab
options, refer to the Cut Tab section in the Setup Properties section of this manual.

Job Properties Color Tab

For more information on Color Tab options, refer to the Color Tab section in Color Tab section of this manual.