RCA L32WD23 - Manual (Page 37)

Chapter 4 37
Using the TV's Menu System
Advanced Audio Menu
Audio Language (only available on digital channels) Press
the right arrow to choose from the audio languages available for
the program you're watching. The language you choose becomes
your preferred audio language for all channels on the digital tuner
until you turn the TV off. If the language you choose here is not
being broadcast with a program, then the TV plays the default
audio for the program (usually English in the U.S.).
Digital Audio Output Lets you choose a setting for the DIGITAL
AUDIO OUTPUT jack. Choose Digital to receive Dolby Digital
sound if transmitted and you've connected a six-channel receiver
to the TV's output jack. Choose for PCM if your audio receiver
only handles PCM.
TV Speakers Turn on or off the internal speakers. If you have
an audio amplifi er device connected to the DIGITAL AUDIO
OUTPUT jack on the back of the TV and you want to control the
sound by the audio amplifi er device instead, turn the option Off.
VGA Sound Source Allows you to listen to the audio from the
VGA, COMPOSITE (side and rear), or COMPONENT 1 or 2 inputs
while tuned to the VGA input. Make sure the device connected to
the input is turned on and the audio you want to hear is playing.
Reset All Restores the Advanced Audio Menu to the default
settings.
Reset All Restores the Audio Menu to the default settings.
Options Menu
The Options menu lets you adjust additional options for the TV. To
access the Options menu (lock icon), press MENU on the remote, and
then press the down arrow to highlight the Options icon. Press the
right arrow button or OK to enter the menu. The following options can
be adjusted:
Set Time Lets you set the time zone and time.
Time Press the left or right arrow to set the time. The AM and PM
setting changes when you get to 12 o'clock.
Note: If your TV loses power, you need to reset the time.
Sleep Timer Lets you set the TV to turn off after a given amount of
time. Choose between Off, 30 min, 60 min, or 90 min.
Set Password Set the password used to lock parental controls. Go
to page 30 for more information.
Parental Controls The Parental Controls menu was explained in
Chapter 2. Go to page 29 for more information.
Analog Captions Many programs are encoded with closed-
captioning information, which lets you display the audio portion of a
program as text on the TV screen. If you are unsure of the differences
among the modes, you may prefer to leave the closed captioned mode
set to CC1, which displays complete text of the program in the primary
language in your area.
Note that Closed captioning is not available on all channels at all times.
Only specifi c programs encoded with closed-captioning information.
Options
To Move
u
u
u
Set Time
Sleep Timer Off
Set Password
Parental Controls
Analog Captions CC1
Digital Captions Text1
Digital Caption Setup
OK To Select MENU To Exit
u
u
u
u
Advanced Audio Menu
u
u
To Move
u
u
u
Audio Language English
Digital Audio Output Digital
TV Speakers On
VGA Sound Source VGA
Reset All Reset
OK To Select MENU To Exit