RCA L32WD23 - Manual (Page 15)

Connections and Setup
Chapter 1 15
INPUT SUB CH
SOUND FAVORITE
SLEEP CC PRESETS
MENU CLEAR
GUIDE
MUTE
GO BACK
VOL CH
ON•OFF
SAT•CBL DVD•VCR
TV FORMAT
INFO
Plug in the TV
Plug the end of the power cord into the back of the TV. For models L26WD23, L32WD23,
and L36WD23, plug the power cord into the power adapter, then plug the power adapter
into the TV. Plug the other end of the power cord into a grounded wall outlet. Insert the plug
completely into the outlet. Do not plug into an outlet controlled by a light switch.
Put Batteries in the Remote
• Remove the battery compartment cover from the back of the remote by pushing the tab
and lifting off the cover.
• Insert two fresh batteries. Make sure the polarities (+ and -) are aligned correctly.
• Replace the cover.
Turn on the TV
Turn on your TV by pressing the Power button on the TV or ON•OFF on the remote control.
Arrows
OK
button
How to Use the Remote Control to
Complete the Initial Setup
The technical term is “Navigation” – how you move through the on-
screen menus. The theory is the same throughout the menu screens:
highlight your choice and select it.
With the Setup menu displayed, press the right arrow button to access
the Setup menu choices. Press the up or down arrow button to move
up or down within the menu. Items with an arrow (4) means there
are more items to choose from or a sub-menu available. Press the right
arrow or OK to display these. Press the MENU button to move back a
menu.
Note: Highlighted means that the menu item stands out from other
menu items on the list (appears darker, brighter, or a different color).