beautypg.com

Quick set-up guide, Connection examples – Runco VX-6c User Manual

Page 86

background image

While there are many different ways to connect your source equipment to your VHD Ultra Controller,
the examples shown above are the most common.

• COMPOSITE VIDEO INPUT:
Composite video is the most common type of signal used, but is also the lowest in picture quality. Many
sources have outputs that are limited to composite video, such as some VCR’s and camcorders; others
such as Laser Disc players actually produce slightly better results when using composite video.

• S-VIDEO INPUT

S-video is the second-best type of signal that can be used, but is MUCH better than composite video.
Using such sources as Satellite receivers, high-quality VCRs and DVD players (with no component
output) will produce a MUCH cleaner and sharper signal.

COMPONENT INPUT

Component video is the best type of signal that can be used. The most common sources that use com-
ponent outputs are DVD players, and it is highly recommended that component be used when possible.
Component video goes one step beyond S-video in picture quality; chroma (color) information is more
resolved and the overall picture appears more well-defined.

• PASS-THROUGH
This input is used to ‘pass-through’ any high-definition or computer signals that do not require process-
ing. The signal by-passes the VHD Ultra Controller’s processing and is sent directly to the display. The
pass-through may be used for COMPONENT outputs from a DTV decoder, a progressive-scan DVD play-
er or RGB outputs from a computer or other high-resolution sources.

QUICK SET-UP GUIDE

Connection Examples

12V TRIGGER

12V FUSE

RGB VIDEO OUTPUT

VIDEO INPUTS

RS-232 IN

MADE IN USA

AC 120V 60Hz, 15W

RUNCO INTERNATIONAL

UNION CITY, CA

MASK

SCREEN

PASS THROUGH

COMPOSITE

V

H

B

G

R

Y

Pr

Pb

S-VIDEO

VX-4c/VX-6c
Projector

Computer or
DTV decoder

DVD Player

Sattelite
receiver or
SVHS player

VCR, Laser
disc player,
camcorders

Reserved for
future use

Automation
System

6-9