Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID - Manual (Page 14)

14 Caller ID Operation
you scroll past the last record,
;dZýe\ýB_ij ;dZýe\ýB_ij ;dZýe\ýB_ij ;dZýe\ýB_ij
ap-
pears, then the first record. When you scroll
past the first record,
;dZýe\ýB_ij ;dZýe\ýB_ij ;dZýe\ýB_ij ;dZýe\ýB_ij
appears, then
the last record.
The top line of each record shows the time,
date, and the number of calls from that num-
ber. The second line shows the caller’s
phone number, and the third line shows the
caller’s name.
To exit the Caller ID record display, press
TALK twice, or return the handset to the
base.
Caller ID Messages
ADDING/DELETING THE
AREA CODE
When the area code of the received call is
the same as the one you stored (see “Storing
Your Area Code” on Page 9), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press
3 to add or delete the area
code. Pressing 3 again deletes or adds the
area code.
DIALING NUMBERS FROM A
CALLER ID RECORD
To dial a local number stored in a Caller ID
record, recall the record, then press
TALK . If
it is a long distance call, press 1 (
''''
appears
before the displayed number) before you
press
TALK . If you want to add or delete the
area code, press 3 before you press TALK .
Note: If a Caller ID record does not contain a
phone number (if it was blocked by the caller,
for example), you cannot dial from that
record.
STORING A CALLER ID
RECORD IN MEMORY
1. Press
8 8 8 8
or
9 9 9 9
to recall the record you
want to store.
If you want to add or delete the area
code, press
3 .
2. Press MEM .
C;CEHO C;CEHO C;CEHO C;CEHO
appears.
3. Choose a memory location (0–9) by
pressing a number or by repeatedly
pressing
8 8 8 8
or
9 9 9 9
.
;cfjo ;cfjo ;cfjo ;cfjo
appears if the location does not
contain a number. The current contents
of the location appear if it does contain a
number. Check to be sure that you want
to overwrite the current contents.
4. Press MEM . The phone beeps to confirm
that it stored the number, then the total
number of Caller ID records appears.
Display Description
JejWb0NN JejWb0NN JejWb0NN JejWb0NN
D[m0ýNN D[m0ýNN D[m0ýNN D[m0ýNN
Shows the number of new
Caller ID records (records
you have not reviewed)
and the total number of
records.
Note: If you have set the
ringer off, only the number
of new records appears.
Fh_lWj[ýDWc[ý Fh_lWj[ýDWc[ý Fh_lWj[ýDWc[ý Fh_lWj[ýDWc[ý
or
Fh_lWj[ýD Fh_lWj[ýD Fh_lWj[ýD Fh_lWj[ýDe$ e$e$ e$
The caller has blocked the
Caller ID information.
KdademdýDWc[ý KdademdýDWc[ý KdademdýDWc[ý KdademdýDWc[ý
or
KdademdýD KdademdýD KdademdýD KdademdýDe$ e$e$ e$
The caller is not within a
Caller ID service area.
:WjWý;hheh :WjWý;hheh :WjWý;hheh :WjWý;hheh Appears if there was an
error during the transmis-
sion of Caller ID informa-
tion. Occasional errors are
normal. If the phone fre-
quently displays
:WjWý :WjWý :WjWý :WjWý
;hheh ;hheh ;hheh ;hheh
, contact your local
telephone company or
RadioShack store.