Ricoh Aficio 3025 - Manual (Page 86)

Copying
76
2
Programs
You can store frequently used copy
job settings in machine memory and
recall them for future use.
Storing a Program
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode
or program No. 10 as the mode to
be set when modes are cleared or
reset, or immediately after the op-
eration switch is turned on. See
p.96 “Change Initial Mode” .
❒ Paper settings are stored based on
paper size. However, if you have
more than one paper tray contain-
ing same size paper, the tray prior-
itized with User Tools (System
Settings) is selected first. See “Pa-
per Tray Priority” in “Tray Paper
Settings”, General Settings Guide.
❒ Programs are not deleted by turn-
ing the power off or pressing the
{Clear Modes} key. They are can-
celed only when you delete or
overwrite them with another pro-
gram.
A
Edit the copy settings so all func-
tions you want to store in this pro-
gram are selected.
B
Press the {Program} key.
C
Press [Register].
D
Press the program number you
want to store.
Note
❒ Program numbers displayed
with m next to them already
have settings.
Reference
p.77 “Changing a stored pro-
gram”
E
Enter the program name using the
letter keys on the display panel.
You can enter up to 40 characters.
Reference
For details about entering char-
acters, see “Entering Text”, Gen-
eral Settings Guide.
Note
❒ If you do not want to enter a
program name, proceed to step
F .
ZLFS310N
RuC4_AE_Copy-F_FM_forPaper.book Page 76 Thursday, April 14, 2005 1:21 PM