RCA RP-7984 - Manual (Page 10)

8
Clearing the Program
To clear the program from memory, press and hold the
PROGRAM button. Pr CLr appears in the display.
Note: The program will also be cleared from memory if
you turn off the unit or press OPEN
to open the CD
drawer.
PLAY
TRACK
PROGRAM REPEAT 1 SHUFFLE
CD
PAUSE ALL
PLAY
TRACK
PROGRAM REPEAT 1 SHUFFLE
CD
ALL
Track number Program number
Program mode indicator
PLAY
TRACK
PROGRAM REPEAT 1 SHUFFLE
CD
ALL
Track 7 is the first programmed track
PLAY
TRACK
PROGRAM REPEAT 1 SHUFFLE
CD
ALL
Track 10 replaces Track 7 as the first programmed
track.
You can clear a program from memory by
pressing and holding the PROGRAM button
until Pr CLr appears in the display.
What’s Program Mode?
Pressing the PROGRAM button
puts you into Program mode
(PROGRAM appears at the top of
the display). In this mode, you can
program tracks, edit the program,
or you can play tracks you’ve
already programmed.
Editing the Program
To edit a program, the unit must be stopped and in
Program mode.
1. Press PROGRAM to move to the next program number
until you get to the programmed track you want to
change (Track 7, Program 01 in the example to the right).
2. Press TRACK/SEARCH or to choose a track
(Track 10 in the example to the right)
3. Press PROGRAM to change the current programmed
track to the one you just selected. (Track 7 is changed to
track 10 in the example to the right.)
Programming Play Order
1. Press the PROGRAM button to enter Program mode.
• - - Pr:01 appears in the display indicating that this is
the first programmed track.
2. Press TRACK/SEARCH or to choose a track.
(PROGRAM begins flashing in the display.)
3. Press PROGRAM to save the track in the program
memory. (PROGRAM stops flashing in the display.)
4. Repeat steps 2-4 above to program up to 20 tracks.
• Pr FuLL appears in the display for three seconds
when the program is full; then the first program
is displayed.
5. Press PLAY/PAUSE to begin programmed play.
6. To stop playing the current programmed track, press
STOP once.
7. To delete a program, press and hold the PROGRAM
button until Pr CLr appears in the display. This deletes
the program, but does not exit you from program mode.
8. To exit program mode, press STOP twice.