Regency U38-LP1 - Manual (Page 19)

Regency ® U38-1 ULTIMATE Freestanding Gas Stove 19
WIRING DIAGRAMS
This heater does not require a 120V A.C. supply
for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate. However,
a 120V A.C. power supply is needed for the
fan/blower operation.
Caution: Ensure that the wires do not touch any hot surfaces and are away from
sharp edges.
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three pronged (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded three-
prong receptacle. Do not cut or remove the grounding prong from this plug.
For NATURAL GAS Units and Units NOT Equipped with DC Spark Boxes
INSTALLATION