RIDGID MS 1065LZ - Manual (Page 10)

10
FEATURES
KNOW YOUR COMPOUND MITER SAW
See Figure 2.
Before using this product, familiarize yourself with all operating
features and safety requirements. However, do not let
familiarity with the tool make you careless.
WARNING:
Exercise caution when using this tool. Careless
actions, for even a fraction of a second, can result
in serious personal injury.
15 AMP MOTOR
Your saw has a powerful 15 amp motor with sufficient power
to handle tough cutting jobs. It is made with all ball bearings.
10 IN. BLADE
A 10 in. (254 mm) saw blade is included with your compound
miter saw. It is fine for most wood cutting operations, but for
fine joinery cuts or cutting plastic, use one of the accessory
blades available from your nearest dealer.
CUTTING CAPACITIES
When the miter angle (miter table) is set at 0 ° :
Maximum dimensional lumber sizes: 4 x 4
2 x 6
When the miter angle (miter table) is set at 45 ° :
Maximum dimensional lumber size: 2 x 4
Fig. 2
LOWER
BLADE GUARD
SAW ARM
MITER
LOCK
HANDLE
SWITCH TRIGGER
MITER SCALE
DUST GUIDE
UPPER
BLADE GUARD
SLIDING
MITER FENCE
MITER TABLE
BEVEL SCALE
BEVEL
LOCK KNOB
POSITIVE
STOP(S)
ZERO CLEARANCE
THROAT PLATE
CONTROL ARM
MITER
LOCK PLATE
MITER
TABLE FRAME
TABLE
EXTENSION
DUST BAG